Imation DataGuard T5R User Manual download pdf (Page 46)

ADMINISTRATION TAB

SUBSYSTEM INFORMATION

The Administration tab enables you to manage the DataGuard

Appliance subsystem, monitor events, manage background activities,

perform ﬁrmware updates, restore factory default settings, and save a

conﬁguration report. Available system information includes:

• Alias (if assigned)

• Vendor

• Model

• Revision Number (of controller board)

• System Date & Time

To change Subsystem settings:

1. From the Administration tab, click the Subsystem Information

menu item. A pane will open with three buttons: Settings, Date

and Time Settings, and Clear Statistics.

2. Click the Settings button.

3. In the Alias ﬁeld, enter an alias or change the existing alias, then

click the Save button.

4. Click the Date and Time Settings button. You can set the date and

time manually, or by synchronizing the clock and calendar with an

NTP service.

✴ To set the date and time manually, click the Date and Time

Settings folder tab. Use the date ﬁeld and pull-down menus to

set the correct date and time, then click Save to apply the new

settings.

✴ To synchronize with an NTP service, click the NTP Management

folder tab. Select an NTP server and schedule, then click the

Save button.

5. To clear statistics on controllers, physical drives, and logical

drives, click the Clear Statistics button. Click Conﬁrm to clear all

information.

Administration > Subsystem Information

To shut down or restart the Subsystem:

1. Click Administration tab > Subsystem Information.

2. Click the Shutdown/Restart button above the Subsystem

Information panel.

3. In the Shutdown/Restart window, you can:

• Click the Shutdown button to stop I/O and shut down the

subsystem.

• Click the Restart button to stop I/O and restart the subsystem.

✓

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 84 85

No comments

Imation DataGuard T5R User Manual Page 46