Imation DataGuard T5R User Manual download pdf (Page 20)

1. From the Device tab, click Wizard on the left menu, then click

Manual Setup. The Storage tab will open to the Disk Array menu

item.

2. Click the Create Disk Array button at top right. The window will

expand to show a front view of the DataGuard Appliance, with

conﬁguration options in text ﬁelds, menus and check boxes.

3. In the Alias ﬁeld, enter up to 32 characters (including letters,

numbers, space between characters, and underscores).

4. Select the check boxes for the features you want to enable:

a. Media Patrol checks the magnetic media on all physical drives

assigned to disk arrays, and on spare drives, as part of routine

maintenance.

b. Predictive Data Migration (PDM) automatically copies data

from hard drives on which errors are detected to an assigned

spare drive. Refer to page 38 for instructions.

c. Power Management allows hard drives to enter standby mode

after they are idle for a set period.

5. Use the Media Type menu to select the type of drive or drives in

the array. All drives in an array must be either hard disk drives or

solid state drives. You cannot mix media types in a single array.

6. Select Physical Drives lets you click the drives on the DataGuard

Appliance image to add them to your disk array. The ID numbers

of the selected drives will appear in the ﬁeld below the diagram.

7. Review these items in the Summary table. To change any setting,

click the Cancel button to return to a previous menu. To accept

the proposed conﬁguration, click the Submit button. Click

conﬁrm to apply the proposed settings, or cancel to reject them.

8. When the setup process is ﬁnished, the message Setup Wizard

Complete will appear.

• To create additional disk arrays, click the Create More button.

• If you are done creating disk arrays, click the Finish button.

mAnuAl Setup

To use the Manual Setup option, follow the instructions below.

1. From the Device tab, click Wizard on the left menu, then click Manual

Setup. The Storage tab will open to the Disk Array menu item.

2. Click the Create Disk Array button at top right. The window will

expand to show a front view of the DataGuard Appliance, with

conﬁguration options in text ﬁelds, menus and check boxes.

Device > Wizard > Manual Setup > Create Disk Array (T5R)

Device > Wizard > Manual Setup > Create Disk Array (R4)

Device > Wizard > Manual Setup

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 84 85

No comments

Imation DataGuard T5R User Manual Page 20